How to Guide

ManualsBrandsBLACK+DECKER ManualsLighting & Ceiling FansPush Connect 9-in Hardwired/Plug-In Light Bar Under Cabinet Light

LED UNDER CABINET LIGHTING

CATALOG NUMBERS

LEDUC9-1WB

LEDUC9-1CB

LEDUC-25JUMP

To register your new product visit

PureOpticsLED.com/New-Product

PLEASE READ THIS MANUAL BEFORE RETURNING THIS

PRODUCT FOR ANY REASON.

If you have a question or experience a problem with your BLACK+DECKER

purchase, go to PureOpticsLED.com/Support. If you can’t ﬁnd the answer or do

not have access to the internet, call 1-855-784-4322 from 8 a.m. to 5 p.m. Monday

– Friday to speak with an agent. Please have the catalog number available when

you call. To ﬁnd the catalog number, please refer to product packaging.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Thank you for choosing BLACK+DECKER!

INSTRUCTION MANUAL

Summary of content (4 pages)

PAGE 1
TM LED UNDER CABINET LIGHTING INSTRUCTION MANUAL CATALOG NUMBERS LEDUC9-1WB LEDUC9-1CB LEDUC-25JUMP Thank you for choosing BLACK+DECKER! PLEASE READ THIS MANUAL BEFORE RETURNING THIS PRODUCT FOR ANY REASON. If you have a question or experience a problem with your BLACK+DECKER purchase, go to PureOpticsLED.com/Support. If you can’t find the answer or do not have access to the internet, call 1-855-784-4322 from 8 a.m. to 5 p.m. Monday – Friday to speak with an agent.
PAGE 2
SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. DANGER: Indicates a imminently hazardous situation, which, if not avoided, will result in death or serious injury and/or property damage.
PAGE 3
POWERING ON/OFF Using the Power Button: Press the power button located on the light bar once to turn the lights on. To turn off, press the power button again. (See FIG. 1) Using the Motion Sensor: Ensure that your hand is within at least 2” of the motion sensor on the mounted control box. Wave your hand in any direction underneath the control box to turn the power on and/or off. (See FIG. 2) FIG. 1 USING THE DIMMER There are ten (10) preset lighting levels that can be adjusted with the dimmer button.
PAGE 4
STEP-BY-STEP INSTALLATION For additional information, please visit PureOpticsLED.com It is important and necessary to follow all local and national electrical codes. If you are unsure of your local codes, please contact your local town or city electrical inspector. 1. Consider layout and configuration • Determine how many lights you’ll need to install - each light bar is designed to effectively illuminate cabinets 12”-36”.