Use and Care Manual

BATTERY REMOVAL AND DISPOSAL

This product uses lithium-ionrechargeable and recyclable batteries.When the batteries nolonger

hold a charge, they should be removed from theproduct andrecycled. Theymust not beincinerated

orcomposited.

The batteries can be taken for disposal to a Black & Decker, Company-Owned orAuthorized Service

Center. Some local retailers are alsoparticipatingin a national recycling program(see “RBRC

Seal”). Call your local retailer fordetails. If youbring the batteries toaBlack & Decker Company-

Owned orAuthorizedService Center, the Centerwill arrange to recycle old batteries. Or, contactyour

local municipality for proper disposal instructions inyour city/town.

To remove the battery pack for disposal:

1.) First, before attempting to disassemble the product, turn it on and run it in either

direction until it stops to ensure a complete discharge of the batteries.

2.) Remove the screws in the product housing and lift the housing half from the tool.

3.) Disconnect the terminal clips from the batteries and lift the batteries out.

4.) Place the battery in suitable packaging to prevent a short circuit of the battery terminals.

5.) Dispose of batteries as per recommended guidelines.

TROUBLESHOOTING

Problem Possible Cause Possible Solution

• Battery will not charge. • Charger not plugged into • Plug charger into a

a working outlet. working outlet. Refer to

“Important Charging

Notes” for more details.

• Check current at

receptacle by plugging in

a lamp or other appliance.

• Check to see if

receptacle is connected to

a light switch which turns

power off when you turn

out the lights.

• Charger jack not fully plugged • Check to be sure

into tool charging socket. charger plug is fully

inserted into tool

charging socket.

For assistance with your product, visit our website www.blackanddecker.com for the

location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.

ACCESSORIES

Recommended accessories for use with your tool are available from your local dealer or

authorized service center. If you need assistance regarding accessories, please call:

1-800-544-6986.

WARNING: The use of any accessory not recommended for use with this tool could be

hazardous.