www.blackanddecker.co.
A B C D 2 E
(Original instructions) ENGLISH Intended use e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord Your BLACK+DECKER multi-purpose tool has been designed for suitable for outdoor use reduces the risk of electric shock. a wide range of DIY applications. f.
ENGLISH (Original instructions) c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e.
(Original instructions) Residual risks. Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include: u Injuries caused by touching any rotating/moving parts. u Injuries caused when changing any parts, blades or accessories.
ENGLISH (Original instructions) Features This tool includes some or all of the following features. 1. Variable speed switch 2. Forward/reverse slider 3. Head release button 4. Bit holder 5. Battery 6. Battery release button 7. Drill/screwdriver head (MTDD6) 8. Torque adjustment collar 9. Chuck 10. LED work light Assembly Warning! Before assembly, remove the battery from the tool. Fitting and removing the battery (fig. A) u u To fit the battery (5), line it up with the receptacle on the tool.
(Original instructions) If the new battery gives the same indication as the original battery, take the charger to be tested at an authorised services centre. Note: It may take as long as 60 minutes to determine that the battery is defective. If the battery is too hot or too cold, the LED will alternately blink red, fast and slow, one flash at each speed and repeat. u Selecting the torque or drill position (fig. D) This tool is fitted with a collar to set the torque for tightening screws.
ENGLISH (Original instructions) Mains plug replacement (U.K. & Ireland only) If a new mains plug needs to be fitted: u Safely dispose of the old plug. u Connect the brown lead to the live terminal in the new plug. u Connect the blue lead to the neutral terminal. Warning! No connection is to be made to the earth terminal. Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 5 A. Protecting the environment Z Separate collection.
(Original instructions) EC declaration of conformity MACHINERY DIRECTIVE % MT218, MTDD6 Black & Decker declares that these products described under "technical data" are in compliance with: 2006/42/EC, EN60745-1, EN60745-2-1, EN60745-2-2 Black & Decker declares that the product including the alternative accessory head as described below are in compliance with: These products also comply with Directive 2014/30/EU and 2011/65/EU.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 Tel. Fax 03-8720 5100 03-9727 5940 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Aukland 1060 Tel. Fax +64 9 259 1133 +64 9 259 1122 United Kingdom & Republic Of Ireland www.blackanddecker.co.uk emeaservice@sbdinc.com Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD Tel.
