MT250
B 2 A C D E
F G H 3
ENGLISH (Original instructions) Intended use Your Black & Decker oscillating tool has been designed for DIY applications such as sanding operations. It is also suitable for cutting wooden materials, plastic, gypsum, non-ferrous metals and fastening elements (e.g., unhardened nails, staples), working soft wall tiles and scraping of small surfaces. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions.
(Original instructions) d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use.
ENGLISH (Original instructions) Vibration The declared vibration emission values stated in the technical data and the declaration of conformity have been measured in accordance with a standard test method provided by EN 60745 and may be used for comparing one tool with another. The declared vibration emission value may also be used in a preliminary assessment of exposure. Accessories This tool includes some or all of the following accessories. The performance of your tool depends on the accessory used.
(Original instructions) Carbide grout removal blade. (Part number - X26125-XJ) Carbide coated surface ideal for clearing grout and tile adhesive from flat surfaces and for fast stock removal of wood, chipboard and fibreglass. Carbide rasp. (Part number - X26130-XJ) Carbide coated surface ideal for grout removal and for fast stock removal of plastics, chipboard and fibreglass. Sanding Sheets. Various grades for sanding of wood, painted and varnished surfaces.
ENGLISH (Original instructions) Switching on and off (fig. H) u u To switch the tool on, slide the on/off switch (1) forward (position I). To switch the tool off, slide the on/off switch (1) to the rear (position O). Hints for optimum use u u u u u u u u u u u u u Always hold the tool securely. For precision work, hold the tool near the front. Clamp the workpiece whenever possible, especially when using cutting blades. Do not exert too much pressure on the tool.
(Original instructions) Technical data Guarantee MT250 (Type 1) Voltage VAC 230 No-load speed min-1 10,000-20,000 Degrees 1.4 or 2.8 Power W 250 Weight kg 1.4 Oscillating angle ENGLISH Level of sound pressure according to EN 60745: Sound pressure (LpA) 79.7 dB(A), uncertainty (K) 3 dB(A) Sound power (LWA) 90.7 dB(A), uncertainty (K) 3 dB(A) Vibration total values (triax vector sum) according to EN 60745: Cutting wood (ah, CW) 10.2 m/s2, uncertainty (K) 1.5 m/s2 Cutting metal (ah, CM) 4.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90586770 REV-0 Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel.
