RT650 1 RT650_UK.
Copyright Black & Decker 2 RT650_UK.
2 1 3 4 7 6 5 A 2 2 B B A A 5 4 6 5 B C 3 RT650_UK.
1 3 D E F 4 RT650_UK.
ENGLISH ROTARY TOOL RT650 CONGRATULATIONS! You have chosen a Black & Decker tool. Our aim is to provide quality tools at an affordable price. We hope that you will enjoy using this tool for many years. EC DECLARATION OF CONFORMITY RT650 Black & Decker declares that these products conform to: 98/37/EC, 89/336/EEC, 73/23/EEC, EN 50144, EN 55014, EN 60555 Level of sound pressure, measured according to EN 50144: RT650 LpA (sound pressure) dB(A) 66.8 LWA (acoustic power) dB(A) 79.
ENGLISH General 1. Keep work area clean Cluttered areas and benches can cause accidents. 2. Consider work area environment Do not expose the tool to rain. Do not use the tool in damp or wet conditions. Keep the work area well lit. Do not use the tool where there is a risk of causing fire or explosion, e.g. in the presence of flammable liquids and gases. 3. Keep children away Do not allow children, visitors or animals to come near the work area or to touch the tool or mains cable. 4.
ENGLISH Keep handles and switches dry, clean and free from oil and grease. 20. Repairs This tool complies with relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts; otherwise this may result in considerable danger to the user. ELECTRICAL SAFETY The electric motor has been designed for one voltage only. Always check that the power supply corresponds to the voltage on the rating plate.
ENGLISH Using an extension cable Always use an approved extension cable suitable for the power input of this tool (see technical data). Before use, inspect the extension cable for signs of damage, wear and ageing. Replace the extension cable if damaged or defective. When using a cable reel, always unwind the cable completely. Use of an extension cable not suitable for the power input of the tool or which is damaged or defective may result in a risk of fire and electric shock.
ENGLISH ◆ Set the control knob (3) to the desired setting. At setting 1 the tool will operate at low speed, 8,000 min-1. At setting 6 the tool will operate at the maximum speed, 27,000 min-1. The table below suggests settings for different applications. Application Drilling holes Cutting metal Engraving metal Removing rust Sharpening Polishing Sanding wood Removing paint Setting 4-5 5-6 4-5 1-2 3-5 1-2 5-6 3-5 Switching on and off (fig.
ENGLISH The terms and conditions of the warranty could also be rendered void. OUR AFTER SALES SERVICE POLICY (UK, AUSTRALIA AND NEW ZEALAND ONLY) Full details on our after-sales service are available on the Internet at www.2helpU.com. Alternatively, contact our Service and Information Centre at the address towards the back of this manual. It is our aim that all Black & Decker customers should be totally satisfied with their Black & Decker product and our after sales service.
RT650_UK.
RT650_UK.
RT650_UK.
Australia DEWALT Industrial Power Tool Company 7 Clarice Road Box Hill, Victoria 3128 Tel. 03 9895 9200 Fax 03 9899 7465 New Zealand Black & Decker 81 Hugo Johnson Drive Penrose, Auckland, New Zealand Tel. 09 579 7600 Fax 09 579 8200 South Africa Black & Decker South Africa (Pty) Ltd Physical address: 146 Lechwe Street Corporate park Randjiesfontein, Midrand Postal address: Postnet Suite 107, Private Bag X65 Halfway House 1685 Tel.
○ ○ 15 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 13-11-2000, 11:03 Yes No Was this tool your first purchase? Yes No Was this tool a gift? Postal code: ............................................................................................. Town: ....................................................................................................... Address: ........................................................................
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ GUARANTEE CARD 13-11-2000, 15:06 16 RT650_UK.PM5 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ✁ Please complete this section immediately after the purchase of your tool and send it to Black & Decker in your country. If you live in Australia or New Zealand, please register by using the alternative guarantee card supplied.
