Powerful Solutions www.blackanddecker.co.
English 2 (Original instructions) 5
2 A 4 B 2 5 6 C D E F 3
G 4
Intended use Your Black & Decker sander has been designed for sanding wood, metal, plastics and painted surfaces. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Service a.
Fitting sanding sheets (fig. A) Warning! Never use the tool without a sanding sheet or accessory in place. u Press the sheet firmly and evenly onto the sanding disc (3), making sure that the holes in the sheet line up with the holes in the base. Fitting and removing the dustbag (fig. B) u u Fit the dustbag (4) into the dust extraction outlet (2). To remove the dustbag, pull it off the dust extraction outlet. Connecting a vacuum cleaner (fig.
You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com Technical data Input voltage VAC Power input W No-load speed min-1 Sanding base surface mm Weight kg KA198 TYPE 1 230 260 13,000 ΓΈ 125 1.
TYP. KA198 - KA198GT 27 3 22 26 38 10 23 28 1 13 12 5 33 22 GB ONLY 9 2 3 4 7 6 32 1 8 25 3 KA198 19 17 16 18 24 39 30 29 14 20 21 E13942 10 37 www.2helpU.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. 20 Fletcher Road, Mooroolbark, Victoria, 3138 New Zealand Black & Decker 5 Te Apunga Place Mt Wellington Auckland 1060 United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 90554638 Rev-1 Tel. 03-8720 5100 Fax 03-9727 5940 Tel. +64 9 259 1133 Fax +64 9 259 1122 Tel.
