WDBD10 English 4
FIG. A FIG. B 1 2 3 4 5 6 7 8 9 10 11 12 FIG. C PUSH DOWN 12 7 FIG. D 12 11 10 FIG.
FIG. F FIG. G FIG. H FIG. I FIG. J FIG. K FIG. L FIG. M Dust LED indicator ON/OFF Button FIG. N FIG.
• ENGLISH WDBD10 WET & DRY VACUUM CLEAN SPECIFICATIONS VACUUM Input Voltage V 220-240 Frequency Hz 50/60 Power W 1200 GENERAL SAFETY RULES Warning! Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS SAFETY INSTRUCTIONS General power tool safety warnings. Warning! Read all safety warnings and all instructions.
ENGLISH • 5 the power tool accidentally. d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use.
• ENGLISH CARTON CONTENTS LIST - FIG. A PART DESCRIPTION QTY 3. Install the power head assembly into the drum assembly as shown (Fig. F). 4. Rotate both latches down and press until you hear them snap over the flanges on the drum (Fig. G). 5. Insert the flexile hose connector into the inlet base of the vacuum cleaner.(Fig. H).
ENGLISH • 7 DRY VACUUMING fluff to stick even better. Caution! Never dry-vacuum without the filter assembly installed. Correct disposal of this product 1. For dry –vacuum using, there are two fitting methods: a. Dust bag; b. HEPA filter. For mass dust cleaning, we advise to use dust bag. For a bit but tiny dust cleaning, we advise to use HEPA filter. Since the HEPA filter have better fitting performance but will low down the air flow.
02/2020