Warranty Guide

7
Working with your Workmate
®
Work Center
The Work Center is a vise and workbench all in one. Its basic design and special features
help you perform a complete range of workshop tasks from the simplest to the most
complicated. The heart of the Work Center is in the action of the two parallel vise jaws,
The two vise handles adjust the jaws to a maximum of 4 1/2 inches (114mm) jaw opening.
Because each handle works independently, the opening can be tapered from 0 inches to 5
inches (127mm) maximum. Use of the swivel pegs in the appropriate vise holes extends
the vise capacity of the Work Center up to 10-1/2 inches (266mm) parallel clamping and
22-1/2 inches (570mm) when objects are held diagonally. The Work Center is a useful
sawhorse and holds material securely. Sawing tubular pieces is easy when they are held
horizontally in the specially designed “V” grooves running along the face of the vise jaws.
Vertical “V” grooves in the vise jaws permit rigid vertical grasping of tubular objects.
NOTE: Place your foot on the bracket of the Work Center to steady it.
DO NOT USE AS A STEP.
ACCESSORIES
Recommended accessories for use with your tool are available from your local dealer or
authorized service center. If you need assistance regarding accessories, please call:
1-800-544-6986.
WARNING: The use of any accessory not recommended for use with this tool could
be hazardous.
SERVICE INFORMATION
All Black & Decker Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. Whether you need technical
advice, repair, or genuine factory replacement parts, contact the Black & Decker location
nearest you. To find your local service location, refer to the yellow page directory under
"Tools—Electric" or call: 1-800-544-6986 or visit www.blackanddecker.com
FULL TWO-YEAR HOME USE WARRANTY
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in
material or workmanship. The defective product will be replaced or repaired at no charge
in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from
whom it was purchased (provided that the store is a participating retailer). Returns should
be made within the time period of the retailerʼs policy for exchanges (usually 30 to 90 days
after the sale). Proof of purchase may be required. Please check with the retailer for their
specific return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or
authorized Service Center for repair or replacement at our option. Proof of purchase may
be required.Black & Decker owned and authorized Service Centers are listed under
"Tools-Electric" in the yellow pages of the phone directory.
This warranty does not apply to accessories. This warranty gives you specific legal rights
and you may have other rights which vary from state to state or province to province.
Should you have any questions, contact the manager of your nearest Black & Decker
Service Center. This product is not intended for commercial use.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are
missing, call 1-800-544-6986 for a free replacement.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For
products sold in Latin America, check country specific warranty information contained in
the packaging, call the local company or see the website for warranty information.
See ‘Tools-
Electric’
– Yellow Pages –
for Service &
Sales
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
90555796 WM125.qxd:??????-00 BDL500 laser 9/25/09 12:44 PM Page 7