www.blackanddecker.co.
7 6 A 9 5 11 10 C B 12 14 13 10 4 11 D 2 9 E 5 10
7 6 F 3
Intended use Your Black & Decker rotary hammer drill has been designed for drilling in wood, metal, plastics, and masonry as well as for screwdriving and light chiselling applications. General safety rules Warning! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Service a.
◆ When hammering, the tool should not bounce and run smoothly. If necessary, increase the speed. Chiselling ◆ For chiselling with spindle lock and for light chipping, set the operating mode selector (5) to the position. ◆ Make sure the forward/reverse switch is in the forward position. ◆ When changing from hammer drilling to chiselling, turn the chisel to the desired position. If resistance is felt during mode change, slightly turn the chisel to engage the spindle lock.
Technical data Voltage Power input No-load speed Load speed Impact rate Impact energy Max. drilling capacity Concrete Steel Wood Core drilling capacity in soft brick Chiselling Weight XTD24CK VAC 230 W 650 min-1 0 - 1,100 min-1 0- 820 min-1 0- 4,000 J 2.2 mm mm mm mm 24 13 30 65 yes kg 2.
TYP 1 XTD24CK 147 800 138 142 139 140 143 145 146 144 149 184 137 167 164 165 148 150 166 155 156 154 178 177 162 163 185 152 161 168 172 157 160 158 181 159 169 861 173 180 179 182 171 170 183 817 108 109 110 106 115 121 104 102 116 117 122 119 118 120 101 104 105 113 175 115 123 107 816 103 174 130 128 127 124 125 133 126 114 134 E14098 www.2helpU.
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker 81 Hugo Johnston Drive Penrose, Auckland, New Zealand United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 478770-01 12 Tel. 09 579 7600 Fax 09 579 8200 Tel.