User Manual
Made in Vietnam
ALWAYS take off into the wind.
Operate the control sticks on the
transmitter and check that the
control surfaces move freely and in
the CORRECT directions.
If the model does not respond
correctly to the controls, land it
as soon as possible and correct
the fault.
Check that the transmitter batteries
have adequate power.
When ready to fly, first extend
the transmitter aerial.
Switch on the transmitter.
OFF - ON
OFF - ON
Check that the wings are
correctly fitted to the fuselage.
Switch on the receiver .
OFF - ON
ALWAYS land the model INTO
the wind, this ensu res that the
model lands at the slowest possible
speed.
Empty the fuel tank after flying, fuel
left in the tank can cause
corrosion and lead to engine
problems.
Switch off the receiver .
OFF - ON
Switch off the transmitter .
OFF - ON
OFF - ON
I/C FLYING GUIDE