User Manual

ULTIMATE.
12
Install the spinner backplate, propeller
and spinner cone. The spinner cone is held in
place using two 3mm x 15mm wood screws.
1 1. Install the rubber grommets and brass
collets into the elevator, rudder, and throttle
servos. Test fit the servos into the servo tray.
1 2. Mount the servos to the tray using the
mounting screws provided with your radio
system.
INSTALLING THE SPINNER.
Machine screw.
Rudder servo.
Throttle
servo.
Eleva-
tor
servo.
INSTALLLING THE FUSELAGE SERVO.