User Manual

ULTIMATE.
20
1 1. Cut out the switch hole using a modeling
knife. Use a 2mm drill bit and drill out the two
mounting holes through the fuselage side.
1 2. Secure the switch in place using the
two machine screws provided with the radio
system.
INSTALLING THE SWITCH.
1 2. A drop of C/A glue on the wheel collar
screws will help keep them from coming lose
during operation.
1 1. Assemble and mounting the wheel pants
as shown in the following pictures.
INSTALLING THE MAIN LANDING
GEAR.
1 3. The blind nuts are already mounted in-
side the fuselage.
1 4. The holes in the landing gear should be
to accept the mounting bolts.
Repeat the process for the other wheel.