Installation Guide

PROJECT HOW

’

™

@ WWW.GARDNER

GIBSON.COM COPYRIGHT

2008, 2009, 2010 GARDNER

GIBSON, INC.

Clear roof surface of loose debris

including dirt, gravel, sticks, etc. using

a push broom or blower. Wash away

surface dirt with a pressure washer.

On a clear, warm, sunny day (65°F and

rising), apply Black Jack, Gardner or

STA-KOOL Elastomeric Roof Coating

to a dry roof surface. Cut in along

edges, then move from one end of the

roof to the other keeping a continuous

wet edge. Follow all label directions.

Patching material: brush or trowel

as indicated on container instructions.

Elastomeric coating: Roof brush,

¾” nap roller, or airless spray in 10”-

12” pattern, 2000 psi, .021 to .025

spray tip

•Metal

• Urethane/polystyrene foam

• Concrete roofs

• Aged roll roofing, existing

aluminum & white coatings

• Flat and barrel cement tile

Metal

How to apply elastomeric Cool Roof coatings: 3 easy steps

STEP 1: CLEAN THE SURFACE

STEP 3: APPLY COOL ROOF COATING

RECOMMENDED APPLICATORS

COVERAGE: 2 COATS RECOMMENDED

RECOMMENDED SURFACES

STEP 2: REPAIR & REINFORCE

Patch and repair cracks, blisters and

PAGE 1
How to apply elastomeric Cool Roof coatings: 3 easy steps 1 2 3 STEP 1: CLEAN THE SURFACE STEP 2: REPAIR & REINFORCE STEP 3: APPLY COOL ROOF COATING Clear roof surface of loose debris including dirt, gravel, sticks, etc. using a push broom or blower. Wash away surface dirt with a pressure washer. Patch and repair cracks, blisters and other problem areas using Black Jack Roof-Patch or STA-KOOL White Acrylic Roof Sealant , following label directions. Reinforce with Universal Patching fabric.