Service manual

27
8/14/02
27
COMMUNICATION CABLE
Connecting the communication cable
Motorcycles and ATVs have a “diagnostic” con-
nector integrated into the main wiring harness. The
communication cable connects the PC to the vehicle
using the connector.
CAUTION:
Connect the communication cable with the
vehicle engine management system OFF.
On 2001 and 2002 Motorcycle models, the diag-
nostic connector is located near the ignition coil at
the top of the cylinder head. Vehicle components
must be removed to access the connector.
On 2003 Motorcycles, the diagnostic connector is
located near the main fuse under the seat.
On 2001 - 2003 ATV, the diagnostic connector is
located near the radiator shroud under the front
fender on the left side of the ATV.
OTE :
Check the diagnostic connector pins for any
bending or damage before connecting to the
vehicle.
1. Serial connector (PC)
2. LED
3. Cable
4. Connector (vehicle)
1
3
4
2