Service manual

Electrical_EFI Service Manual.fm

Opening a SAVED Calibration file

NOTE :

A saved calibration file might be one that you have

received via e-mail, downloaded from the our

website, or one that is stored on a diskette or CD.

This button functions the same way as if you click

File - Open in the top right corner of the main

window.

Once “opened,” the file is ready for installation

into the vehicle ECU.

CAUTION:

Before the saved file is sent to the ECU, be sure

to receive the vehicle variable or they will be

lost. Refer to "Receiving a calibration file

FROM THE ECU “Reading a map and

variables”" starting on page 33.

To open a saved calibration file,

NOTE :

In version 2.0 of the software, when the program

is launched, the last engine calibration file that

was opened is automatically open in the main

window. This feature is useful for servicing many

unit at once, however, be sure to check the engine

calibration file Numeric Cal ID code in the main

window to make sure that the right file is being

used. If not, complete steps 2 -3.

1. In the main window, click on the “OPEN

Calibration File (saved) button.

Use the Windows explorer to locate (browse for)

the saved engine calibration file.

Select the file and click OK.

2. The file is now “loaded” to the main window.

CAUTION:

Check the Numeric Cal ID field in the main

window to make sure the filename selected is

displayed. If not, go back to step 2 and repeat.