Service manual

© 2002 Cannondale Corporation - All Rights Reserved
36
Electrical_EFI Service Manual.fm
to the next step to learn more.
7. If you click the Accept Values button, the values of
the engine calibration file currently stored in the
CDMT will change to the new ones and immedi-
ately the Send Calibrations to the ECU prompt will
display.
If you click Cancel, the new values you just read
from the vehicle will be “forgotten” and the values
will revert back to the values of the currently open
engine calibration file; and, the CDMT main win-
dow will display.
8. If you click OK, at the Send Calibrations to ECU
prompt, the Select TPS/Inj Calibrations window
will display next. Go to the next step.
If you click Cancel at the Send Calibrations to
ECU prompt, the new values will be updated in
the currently open engine calibration file and
remain until the file is closed, another new engine
calibration file opened or the values are changed
again using the Set Throttle Position button.
9. At the Select TPS/Inj Calibrations window, select
the values to send to the ECU by clicking in the
check boxes. The values displayed in the “From
File” column are the values of the current engine
calibration file open in the CDMT. The values of
the “From ECU” column are the old values.
Click OK to send the values to the ECU. Watch
C
li
c
k
t
hi
s
butto
to
re
ad
t
he TP
s
en
so
r minim
u
voltage.
T
he
s
e fiel
ds
d
ispla
y
s the value
s
t
h
at
a
re
"
read
y
to accept
"
T
he fields initiall
y
s
h
o
w
a
v
a
l
u
e
o
f
t
h
e
c
urrentl
y
open file.
T
he values will chan
ge
i
mmediatel
y
after th
e
butto
n
s
at
t
he lef
t
a
re
c
li
c
ke
d.
The Send Calibrations to the ECU prompt