Installation manual
REMOTE AUTO START
FOR KEYLESS ENTRY AND ADD-ON REMOTE START MODULES
BEFORE INSTALLING THIS PRODUCT PLEASE READ
THIS INSTALLATION MANUAL THOROUGHLY!!
INSTALLATION MANUAL
This remote start product is intended for installa-
tion on vehicles equipped with automatic transmis-
sions and electronic fuel injection only!
DO NOT INSTALL THIS UNIT INTO A MANUAL
TRANSMISSION VEHICLE AS IT COULD RESULT IN
SERIOUS INJURY OR DEATH.
• This product must be installed by qualified per-
sonnel according to these instructions and
observing all safety features.
• The system should be placed into the valet
mode when parked inside a garage or being left for
service.
• Always notify service personnel that the vehi-
cle is equipped with a Remote Starter.
• Only start the vehicle in a well ventilated area.
Do not use in a closed garage or indoors.
ITEMS INCLUDED:
• Main unit
• Remote transmitter(s)*
• Plug In LED
• Plug in program switch
• Harness kit with 2 heavy duty fuse holders
• Hood pinswitch
• Extended range receiver module*
• Owner’s manual
*
S models are provided with single transmitter only.
Add-on modules do not include transmitters.
OPTIONAL ACCESSORIES:
• VAC-10 Vacuum Switch Kit
• APP-1 Universal OEM transponder bypass kit
• APV-1 GM VATS, Passlock I&II bypass kit
• PDLM-3 Power door lock relay module
Before you begin the installation:
• Verify that the vehicle is equipped with elec-
tronic fuel injection.
• Verify that the vehicle is equipped with an auto-
matic transmission.
• Check to see if the vehicle is equipped with any
type of factory security system.
• Check to see if there is a pinswitch for the
hood, if not one must be installed.
• Verify that the vehicle starts and idles proper-
ly before you start the installation.
• Verify with the customer the desired location
for the program switch and LED.
• Always use a multimeter when verifying vehi-
cle wiring.
Remote Start Installation Notes:
The remote start unit senses the vehicle’s success-
ful start using one of the following methods:
1. Current sense
2. Tachometer sense
3. Spark or coil wire sense
4. Using optional vacuum switch.