Installation manual

ManualsBrandsBlack Widow Security ManualsAutomotiveBW X-Z Series

BEFORE INSTALLING THE BW-1600

• DO read through this installation manual.

• DO NOT install the alarm brain in an engine compartment.

• The alarm may arm itself when power is first connected.This is a normal condition.

ITEMS SUPPLIED WITH THE BW-1600

BW-1602 Receiver and Control Module BW-260PValet/Override Switch

BW-385 2-Button, Code Learning BW-180P LED Status Indicator

Transmitters (2)

BW-12016 Wiring Harness, Fuseholder, & Fuse

MTS-20W Six-tone, soft chirp, 120 dB Siren BW-296P Dual Zone Electronic Shock Sensor

BW-12016DL Door Lock Harness

OPTIONAL ACCESSORIES

Radar Field Sensor.........................................MAS-2 Backup Battery .......................................................BW500

Window Rollup.............................................WRM-2 Remote Starting.................................................RAS-101

Power Door Lock........................................PDL-50 Trunk Release ........................................................TR-100

Relay......................................................................SPDT Relay Socket........................................................BRS-003

5-wire Door Lock relay & socket.BRS-008PR Glass Sensor.......................................................BWS-200

(+) Door Lock Inverter.............................BW-345

SPECIFICATIONS

Operating voltage...............+12 VDC Neg. Ground

Code Learning ......................................3 Codes Max.

Current consumption.........5 mA (max) disarmed.

Siren output drive ......................................3 Amperes

Automatic reset........................................60 seconds.

Door Lock/Unlock Output ...................(-) 500 mA.

Channel 2 Output Drive........(-) 500 mA variable.

Remote control transmit freq.............................310 mHz.

Passive arming delay............................30 Seconds approx.

Auxiliary output drive..........................250 mA maximum.

Flashing output drive............................10 Amp maximum.

Trigger inputs..............................................1) Neg. pnswtch.

1) Pos. pnswtch. 1) Neg. sensor or aux. pnswtch.

INSTALLATION MANUAL

Please read this Black Widow manual carefully before attempting to install this system.

• BLACK WIDOW •

INSTALLATION MANUAL

Summary of content (7 pages)

PAGE 1
• B L A C K W I I N S TA L L AT I O N D O W • M A N U A L Please read this Black Widow manual carefully before attempting to install this system. BEFORE INSTALLING THE BW-1600 • DO read through this installation manual. • DO NOT install the alarm brain in an engine compartment. • The alarm may arm itself when power is first connected.This is a normal condition.
PAGE 2
-1INSTALLATION INSTRUCTIONS IMPORTANT: Make all wiring connections to the vehicle before connecting the main 10-pin harness and all plug-in connectors to the receiver control module. 1. Before mounting the BW-1602 Receiver and Control Module, you must set the PROGRAMMING DIPSWITCHES for the kind of operation the customer wants. These are the switch settings available; Standard (Default) settings are in “BOLD” type: Switch #1 Door Lock and Unlock Pulse Time: ON = 3/4 seconds. OFF = 3 seconds.
PAGE 3
POSITIVE TRIGGER DOOR LOCK CIRCUIT*: POWER DOOR LOCK DIAGRAMS: TO DOOR LOCK RELAY The BW-1600 comes equipped to handle ground door lock installations. The Blue and Green wires from the Receiver Module are ready to tap into grounding door lock systems. The following door lock diagrams require two SPDT Relays or the appropriate accessories not included with the BW-1600.These items must be ordered separately.
PAGE 4
• B L A C K W I I N S TA L L AT I O N D O W • M A N U A L BW-650 KEYLESS ENTRY Please read this Black Widow manual carefully before attempting to install this system.
PAGE 5
WIRING DIAGRAM RED/BLACK WHITE 3rd CHANNEL DOMELIGHT JUMPER 1 GREEN JUMPER 2 RED BLUE DOOR LOCK CONNECTOR NEGATIVE DOOR LOCK OUTPUT (SEE PAGE 5) OPTIONAL (+) 12V OUTPUT NEGATIVE DOOR UNLOCK OUTPUT (SEE PAGE 5) WHITE RED OPTIONAL STARTER INTERRUPT RELAY FUSE (+)12V AT BATTERY 86 30 87A BROWN RECEIVER MODULE BLACK HARNESS ORANGE CUT 2nd CHANNEL } BLACK 87 86 GROUND TO STARTER X D1A DIODE IGNITION SWITCH NOT USED BY THIS MODULE TO BATTERY IGNITION WIRE ANTENNA (DO NOT GROUND THIS WI
PAGE 6
SYMPTOM PROBABLE CAUSE SUGGESTED CORRECTION Alarm will not go into Code Learning Mode RED or YELLOW wire not connected to the correct power source. Code Learning sequence done to slow. RED wire should connect directly to the battery. Connect YELLOW wire to true ignition wire (Not at Fuse Block). Redo Code Learning sequence faster. Unit is triggered any time it is armed. BW296P sensor not adjusted correctly, BLUE or GREEN wire shorted to ground. Readjust BW-296P sensor.
PAGE 7
LIMITED LIFETIME WARRANTY The Black Widow Division of DLC, Inc. warrants to the original purchaser that the vehicle alarm system purchased will be free from defects in workmanship. If it is determined that a defect exists, at our option, we will repair defective parts or replace the system. If product is defective within one (1) year from date of purchase, item will be repaired or replaced at no cost to original purchaser.