Service manual

SKYJACK, Page 32 SJIII Series
Section 1 - Scheduled MaintenanceService and Maintenance
Test Tilt Sensor (If Equipped)•
WARNING
Be aware of overhead obstructions
or other possible hazards around the
aerial platform when lifting.
WARNING
Ensure that there are no personnel
or obstructions in the path of travel,
including blind spots.
1. Move the aerial platform on to a slope not
greater than 4.5°.
2. Use the ladder to dismount from
platform.
3. On base control console, slowly raise the
platform.
Result: When platform reaches an
appropriate height, a warning signal
should sound and platform stop raising
as lift and drive controls should be
disabled.
Platform Control Console
Platform
Railing
Manual Storage Box
Platform
Assembly