H.264 Hidden Recorder Board (HVR-Lite) User Manual Ver. 1.0.
Thank you for purchasing our H.264 Hidden Recorder Board (HVR-Lite). Please read this manual before installation. For customer support, contact your dealer, keep your Invoice for further support. Do not open/modify the device, as it may cause damage to the unit and void the Warranty. For internal repairs, consult your dealer or an Authorized Service Center. Do not use any accessories other than what comes with the unit otherwise, it would void the warranty. Protect from humidity.
Table of Contents Table of Contents .............................................................................................................................. - 1 Package contains ............................................................................................................................. - 2 Diagram ............................................................................................................................................. - 2 Cable Introduction .........................
Package contains Main unit x 1 IR remote control x 1 Cable accessory x 1 CD (Software, user manual) x 1 Diagram White: audio out black: ground red: power input 12VDC input Micro SD Slot A/V output black: ground yellow: video out A/V input & Power output IR Receiver red: power out black: ground yellow: video in white: audio in Buzzer -2-
Cable Introduction IR Cable Power cable AV output cable AV input/ Power output cable Operation 1. Connect 12VDC power supply to #3194071. 2. Connect AV in/Power out cable to camera. #3194071 will supply 12VDC to camera. 3. Insert micro SD card to #3194071. * DVR will detect memory card automatically. * For storage, #3194071 will auto-format Micro SD card if the original Micro SD card format is different. Please make sure Micro SD card has done backup before inserted to #3194071.
IR Remote Controller Button Function Description Universal password: UP/UP/DOWN/DOWN/+/+/-/- Panic Record Start to Record manually.
OSD Operation * When you get into MENU or PLAY mode, it would need password if #3194071 is in key lock mode. Please enter password (default: 1234) and press . If password is correct, user can get into MENU or PLAY mode. If it is incorrect, the password will go back to the first digi t. (Universal password: ) LIVE/RECORD Instruction 1 H264 95% O ID LOCK FULL LOSS 2010/10/01 10:10:25 ● CON 1 H264 LOCK 95% R ID LOW 2010/10/01 10:10:25PM ● PAN 1 H264 NO SD R 1. 2. 3. 4. 5.
PLAYBACK Instruction 1 1. 2. 3. 4. 5. 6. 7. 8. 9. ID FULL >PB 1X PAUSE ID CAM_01: the ID of recording >: Playback <: Rewind playback PB: Playback mode 1X: Speed of playback, 1X/ 2X/ 4X/ 8X PAUSE: Pause palyback 2010/10/01: Date of recording 10:10:25: Time of recording FULL: Battery status (shows only in battery mode) 2010/10/01 10:10:25 OSD Menu Structure Tree MENU I. CHANNEL SETUP TITLE SETUP COLOR SETUP II. DATE/TIME SETUP III. SD CARD SETUP SD INFORMATION SD REC MODE SD FORMAT IV.
MENU OPERATION 1. Press MAIN MENU to enter MAIN MENU CHANNEL SETUP DATE/TIME SETUP 2. Press to select item SD CARD SETUP 3. Press RECORD SETUP to enter the selected item PERIPHERAL SETUP SYSTEM SETUP I. CHANNEL SETUP 1. Press to select item CHANNEL SETUP 2. Press to enter the selected item TITLE SETUP COLOR SETUP TITLE SETUP CHANNEL 1: _ _ _ 1 1. Press to change value 2. Press to change cursor 1. Press to select item 2.
II. DATE/TIME SETUP DATE/TIME SETUP 1. Press to select item DISPLAY FORMAT:YY/MM/DD TIME FORMAT: 12H YEAR: 2000 2. Press to change value DAY: 06 * Display Format: YY/MM/DD, MM/DD/YY, or DD/MM/YY. HOUR: 21 * Time Format: 12H/ 24H MONTH: 01 MINUTE: 06 DAYLIGHT SAVING TIME SETUP DAYLIGHT SAVING TIME SETUP 1. Press to select item 2. Press to change value 1. Press to select item TURN: OFF START TIME MONTH: 04 DAY: 02 HOUR: 00 END TIME MONTH: 11 DAY: 04 HOUR: 00 III.
FORMAT SD 1. Press to change mode 1. Press to select item FORMAT SD: NO PRESS ENTER KEY TO RUN IV. RECORD SETUP RECORD SETUP RECORD MODE 2. Press to enter the selected item 1. Press to change cursor 2. Press to change value CONTINUOUS RECORD MOTION RECORD PANIC RECORD ALARM RECORD RECORD MODE AM PM 0- -3--6- -9--0--3- -6--9-MMMMMMMMMMMMMMMMMMMMM M: MOTION P: PANIC C: CONTINUOUS A: ALARM 1. Press to change value CONTINUOUS RECORD FRAME RATE: H264 30 (N) / 25 (P) 2.
MOTION RECORD FRAME RATE: H264 30 (N) / 25 (P) QUALITY: SUPER SENSITIVITY: HIGH POST-RECORD: 10 SEC PRE-RECORD: ON 1. Press to change value 2. Frame rate adjustable by users: H264 30(N)/25(P); H264 15(N)/12(P); H264 8(N)/6(P) 3. Quality adjustable by users: Super/ Low/ STD/ High 4. Sensitivity adjustable by users: High/ Med/ Low 1. Press to change value PANIC RECORD FRAME RATE: H264 30 (N) / 25 (P) QUALITY: SUPER PRE-RECORD: ON 2.
BUZZER SETUP VIDEO LOSS : ON MOTION : OFF BEEP TIME : 02 SEC 1. Press to select item 2. Press to change value 1. Press to select item (2~6 SEC) ALARM SETUP 2. Press ALARM INPUT to enter selected item RELAY OUTPUT ALARM INPUT ALARM STATUS 1 N.C. RELAY OUT 1. Press to select item 2. Press to change value ON 3. ALARM STATUS: N.C./ N.O. [N.O.]: Normal Open [N.C.]: Normal Close RELAY OUT RELAY OUT TIME: 10 SEC 1. Press to select item 2.
AUDIO SETUP 1. Press to change value 1. Press to select item 2. Press to enter selected item AUDIO IN : LINE (MIC/LINE) VII. SYSTEM SETUP SYSTEM SETUP DVR ID FACTORY DEFAULT FIRMWARE UPGRADE PASSWORD SETUP 1. Press to change cursor 2. Press to change value 1.
1. Press to select item 2. Press to change value 1. Press to change cursor 2. Press to change value FIRMWARE UPGRADE EXISTING VERSION: B. 0.7.5 NEW VERSION: _ _ _ _ UPDATE: NO PRESS ENTER KEY TO RUN PASSWORD SETUP ENTER PASSWORD: * * * * PLAYBACK MODE In the Playback screen SEARCH 1. Press to enter SEARCH MENU TIME: 2000/ 01/ 01 00:00 RUN EVENT SEARCH 2. Press to select item & BEGIN: NO DATA END: NO DATA 3. Press to change value to run TIME SEARCH SEARCH TIME SEARCH 1.
EVENT SEARCH NO YY/MM/DD HH:MM:SS MODE 0001 09/12/17 12:11:00 C 0002 09/12/17 12:11:07 P 0003 09/12/17 12:11:12 A M: MOTION C: CONTINUOUS EVENT SEARCH 1. Press 2. Press to select item to playback the event P: PANIC A: ALARM Firmware Upgrade Step1: Please insert Micro SD Card into #3194071. If the original format of micro SD card is different, the device will automatically format Micro SD card.
Step7: Press Press and select “ UPDATE: YES” by pressing . to upgrade firmware. NOTES: 1. During firmware upgrade, ISP 1%......100% will be shown on the screen. Please do not shut down, turn off the device or remove Micro SD card. File may not be completely updated under this condition. In addition, old file may be damaged. 2. The system will update the new version and display the progress information. When it is finished, it will automatically reboot.
Search Files Backup DVR file Login Select Path Enter Backup format Set Start Time Set End Time Export backup Cancel file Time/ Date on Time/ Date format Time/ Date top left Change account and password Multiply 32 times the original speed Save JPEG picture Enhance the Print resolution Audio adjust Mute Playback control bar: Stop Pause Last -1/2X -2X -1X 1X 2X 1/2X Next File information: * Computer Requirement: Dual Core CPU or above , 1GB RAM or above * Operation System Requir
Operation procedure Search Files Click Press and then press . Select a folder with DVR files and press “OK” Double click the selected recording file to playback or click the selected recording file and press “Open” to playback. File searching method: * List all time : list all the recording sessions in the folder you browse. * List file event : list the event which you select in “List all time” * Search all event : list all the events in the folder you browse (max.
* Format storage : Format SD card easily Backup Files Press and choose backup format (DVR/ WMV/ AVI/ JPG) and choose backup channel. * Backup as DVR format: Can only backup four channels * Backup as WMV/ JPG format: backup four channels or individual channel * Backup as AVI format: backup four channels or individual channel; backup resolution as CIF or D1. During the playback, you can press to set start time to backup file. Then, press to set end time to backup file.
Playback Files Move the mouse cursor to the place you want to enlarge. Right click to zoom in. Right click again to get back to the original scene. Admin Click and key in account and password. Default: root/ root * Display information: On/Off * Date format: yyyy/mm/dd dd/mm/yyyy mm/dd/yyyy * Time/Date position: Top Left/ Bottom Right Press to change account and password in Admin area.
Specification #3194071 H.264 Hidden Recorder Board (HVR-Lite) Operating System Non-OS Video input format NTSC or PAL (Auto-detect) Video Compression H.