User`s guide

© TELENAV 2003-6 PAGE 29 OF 38
NOTE: There is no provision for recovering an unfortunate deletion!
Maps
This service will obtain and present a map around a selected or newly entered address. The Address Selector
screen shown above is used to start the process of selecting an existing address, or entering a new one.
If you choose Here (your current location), there will be brief activity while TeleNav employs GPS to determine your
location.
After you have selected or entered an address, there will be brief activity indicated by arrows appearing in the upper
right corner of the display while the handheld obtains the map from the TeleNav servers.
The displayed map is always oriented with North towards the top of the
screen. When you move (pan) or zoom, there may be brief activity to fetch
the updated map.
On the 8700, The U H K and N keys move the map laterally according to
their position relative to the J key. This is depicted on the information
screen that is presented while the map is being retrieved, as in the example
shown to the right.
On the 7130, the QW and YX keys move the map vertically, and the AS and
L keys move the map horizontally. The 7130 information screen is not
shown here.
The numbered keys set the zoom level starting from level 3. The zoom
level ranges from 1 through 9. If you are on zoom level 3, the fraction will be
3/9, as shown in the example on the right.