Owner`s manual

TiVo
®
Service Quick Guide
24
Channels
I can’t go to one of my channels.
Review your channel list to make sure all the channels you subscribe to are marked with
a yellow check. Compare the channel list to the list of channels in your cable plan.
The TiVo T6 DVR requires a CableCARD
decoder to receive any cable programming.
Contact Atlantic Broadband Customer Care to make sure that all of the channels in your
cable subscription have been activated on the CableCARD decoder.
You may be trying to access an antenna or analog cable channel. The TiVo T6 DVR, TiVo
Mini, or TiVo Preview does not receive analog channels.
The TiVo Remote Control
Note: Some of the following options apply to using your TiVo remote only with the TiVo T6
DVR. For information about using your TiVo remote with the TiVo Mini or the TiVo Preview,
go to tivo.com/howto
.
My TiVo remote doesn't work with my TiVo T6 DVR, TiVo Mini, or TiVo
Preview.
Be sure you are using the TiVo T6 DVR, TiVo Mini, or TiVo Preview’s remote, and that
you hold it so that the TiVo button points toward the TiVo T6 DVR, TiVo Mini, or
TiVo Preview.
If you are trying to use the TiVo remote in RF mode (so that it can control a TiVo T6 DVR
that is not within line-of-sight), make sure the TiVo remote is paired with the DVR. You’ll
know if the TiVo remote is in RF mode if when you press a button you see a blue light at
the top of the TiVo remote. If the light is red, that means the TiVo remote is in IR mode.
Press any button on the TiVo remote. Does the activity light on the TiVo remote flash?
Activity light