User's Manual

R E M O V E T H E S E 3 - R D R 1 0 0
P RINTED N OVEMBER 24, 2009
1-9
R EMOVE THE SE3-RDR100
To remove the SE3-RDR100 from its mounting
1 If a security screw is installed, re move the Security Screw Cover Decal.
2 Insert the SE3-RDR100 key into the bottom slots.
3 Gently pull the bottom of the reader at an angl e over the mounting plate, and then slide up to
disengage the clip from the mounting plate.
4 Disconnect the terminal block.
5 Remove the wall plate from the mounting if needed.
Figure 1-10 SE3-RDR100 Mounting Removal