Product Brochure
Table Of Contents
- Contents
- Overview
- Compression Connectors for Copper Conductor
- C-Tap Connectors for Copper Conductor
- Copper H-Tap Connectors for Copper Conductor
- Aluminum H-Tap Connectors
- Interlocking Insulating Covers for Compression Taps
- Wire Joints for Copper Conductor
- Cast Copper Bus Taps for Copper Conductor
- Motor Pigtail Connectors
- KUBE® Connectors
- Copper Disconnects
- Connector Kits
- Joint Compound
- Connectors for Aluminum/Copper Code Conductor
- Heavy-Duty Battery Connectors
- Metric Connectors for Copper Conductor
- Tools and Dies
United States
Tel: 901.252.8000
800.816.7809
Fax: 901.252.1354
Technical Services
Tel: 888.862.3289
www.tnb.com
F-57
Connectors & Grounding
—
Blackburn
®
Compression Connectors Featuring the Color-Keyed
®
System
Motor Pigtail Connectors
For easy, reliable sealing of motor
disconnect boots.
Sealant
Sealant should be used with T&B Motor Disconnect Boots:
MDBOOT-0, MDBOOT-1, MDBOOT-2 and MDBOOT-3.
The cable should be clean and free of grease and other foreign substances.
Apply two layers around each cable at the same distance from the connector.
Slide the assembly into boot, apply Ty-Rap
®
cable ties and work sealant
around wires at end of boot to eliminate voids.
.................................... Specifications ...................................
• Description: Polybutene Compound
• Application Temperature: 40° F to 100° F
• Service Temperature: -40° F to 180° F
• Dimensions: Width 1",Thickness
1
⁄8", Length (Std. Roll) 10',
wrapped on release liner
• Environmental Resistance: Resists normal aging process
• Chemical Resistance: Resists acids, bases and alcohols
• Dielectric Strength: 200V/mil minimum
• Volume Resistivity: 1013 ohms/cm
• Flame Retardancy: Pass VO Vertical Flame Test
5kV Motor Pigtail Connector
Supplied with Boot, Pin,
Silicon Gel (Two Female
Connectors Required)
CAT. NO.
WIRE RANGE
AWG
FEMALE DISCONNECT
CAT. NO.
COLOR
CODE
DIMENSIONS
BODY SIZEL W H
5KVBOOT-2L #8 MD8F-2 RED 4.50 2.25 1.44 2
5KVBOOT-2L #6 MD6F-2 BLUE 4.50 2.25 1.44 2
5KVBOOT-2L #4 MD4F-2 GRAY 4.50 2.25 1.44 2
5KVBOOT-2L #2 MD2F-2 BROWN 4.50 2.25 1.44 2
5KVBOOT-2L #1 MD1F-2 GREEN 4.50 2.25 1.44 2
5KVBOOT-3L #2 MD2F-3 BROWN 4.50 2.25 1.44 3
5KVBOOT-3L #1 MD1F-3 GREEN 4.50 2.25 1.44 3
5KVBOOT-3L 1/0 MD10F-3 PINK 4.50 2.25 1.44 3
5KVBOOT-3L 2/0 MD20F-3 BLACK 4.50 2.25 1.44 3
5KVBOOT-3L 3/0 MD30F-3 ORANGE 4.50 2.25 1.44 3
5KVBOOT-3L 4/0 MD40F-3 PURPLE 4.50 2.25 1.44 3
CAT. NO.
DESCRIPTION
MDBOOT-SEAL Sealant
For watertight applications, contact technical services.
Tooling: pp. F-80–F-100
Die Selector Chart: pp. F-101–F-104
Double
Male Pin
4.50
2.25
1.44
End
Start
Start
End