Product Manual

SAVE THESE INSTRUCTIONS

For your safety, read, understand, and follow the information provided with and on this product. The owner

and operator of this equipment shall have an understanding of this product and safe operating procedures

before attempting to use. The owner and operator shall be aware that use and repair of this product may

require special skills and knowledge. Instructions and safety information shall be conveyed in the operator’s

native language before use of this product is authorized. If any doubt exists as to the safe and proper use of

this product, remove from service immediately.

Inspect before each use. Do not use if there are broken, bent, cracked or damaged parts (including

labels). Any product that appears damaged in any way, or operates abnormally shall be removed from

service immediately. If the product has been or is suspected to have been subjected to a shock load (a load

dropped suddenly, unexpectedly upon it), immediately discontinue use until product has been inspected by

a Blackhawk Automotive authorized service center. It is recommended that an annual inspection be done by

qualified personnel. Labels and Operator’s Manuals are available from manufacturer.

PRODUCT DESCRIPTION

The Blackhawk Auxiliary Stand is designed to help prevent the tipping/rocking of a vehicle while the vehicle is

engaged on an automotive lift. Heavy gauge steel construction and compliance with the latest ASME/ANSI

standards ensure safety, strength and stability.

DO NOT USE FOR ANY OTHER PURPOSE THAN THOSE OUTLINED ABOVE

SPECIFICATION

Model Capacity Base Size (L x W x H) Min.Height Max.Height

BH5720 2 Ton 24" x 24" x 24" 67" 76"

Height Adjustment Handle

Lock Pin

Figure 1- BH5720 Components

Lower Link

Saddle

Tripod Legs

Upper Link

Chain