Long Chassis Hydraulic Service Jacks Operating Instructions & Parts Manual Model Number BH6010 BH6011 (Air/Lever Actuated Model) Capacity 10 Ton 10 Ton SFA Companies ©2004 10939 N. Pomona Ave. Kansas City, MO 64153 816-891-6390 sales@blackhawk-automotive.
TABLE OF CONTENTS Warranty Save These Instructions Product Description Specifications & Safety Instructions Assembly Operation Maintenance Troubleshooting Replacement Parts P2 P3 P3 P3 P4 P5 P5 P6 P6 ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship, or which fails to conform to any implied warranty not excluded hereby.
SAVE THESE INSTRUCTIONS For your safety, read, understand, and follow the information provided with and on this jack. The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native language before use of this jack is authorized.
! WARNING ! ADVERTENCIA • Leer, comprender, y seguir las instrucciónes antes de utilizar el aparato. • El manual de instrucciónes y la información de seguridad deben estar comunicado en lengua del operador antes del uso. • No seguir estas indicaciónes puede causar daños personales o materiales. • Study, understand, and follow all instructions • • • • • • • • • • provided with and on this device before operating this device. Do not exceed rated capacity. This is a lifting device only.
OPERATION Lifting 1. Place vehicle in park, with emergency brake on and wheels securely chocked to prevent inadvertent vehicle movement. 2. Locate and close release valve by turning handle knob clockwise firmly. Center jack saddle under lift point. 3. Verify lift point, then use handle pump or foot pedal to contact lift point. To lift, pump handle or squeeze lift control valve until load reaches desired height. Note: Never use foot pedal to raise load. 4.
TROUBLESHOOTING Symptom Jack will not lift load Possible Causes Corrective Action • Release valve not tightly closed • Ensure release valve tightly closed • Overload condition • Remedy overload condition • Air supply inadequate (Apply to • Ensure adequate air supply Model BH6011) Jack will lift, but not maintain pressure • Release valve not tightly closed • Ensure release valve tightly closed • Overload condition • Remedy overload condition • Hydraulic unit malfunction • Contact Blackhawk Tech.
Models BH 6010 and BH6011 Item # 1 2 3 4* 5* 6* 7* 8 9 10 11 11A* 12 13 14 15 - Part # 324-4-1900-208 G10-3-1309-106 G24-3-1700-100 A2706-00 A27-3-2000-104 507-9-0064-013 A27-3-2050-109 500-1-1500-309 G10-6-4201-109 521-2-0370-104 G10-1-2000-109 G10-1-1000-104 473-4-5000-103 521-2-0220-077 G10-3-2000-101 421-3-9004-101 BH6010-L0, BH6011-L0 BH6010-M0 Description Oil Filler Screw Piston Link Flex Joint Assembly Air Motor Kit (includes item 5, 6, and 7) Air Motor Air Hose Lift Control Valve Front Wheel Saddl
memo.
