Air Actuated Axle Jacks Operating Instructions & Parts Manual Model BH6221 BH6301 Capacity 22 Ton 30 Ton SFA Companies ©2004 10939 N. Pomona Ave. Kansas City, MO 64153 816-891-6390 sales@blackhawk-automotive.
TABLE OF CONTENTS Warranty Save These Instructions Product Description Specifications & Safety Instructions Assembly Operation Maintenance Troubleshooting Replacement Parts P2 P3 P3 P3 P5 P5 P5 P6 P6 ONE YEAR LIMITED WARRANTY For a period of one (1) year from date of purchase, SFA Companies will repair or replace, at its option, without charge, any of its products which fails due to a defect in material or workmanship, or which fails to conform to any implied warranty not excluded hereby.
SAVE THESE INSTRUCTIONS For your safety, read, understand, and follow the information provided with and on these jacks. The owner and operator of these equipments shall have an understanding of these jacks and safe operating procedures before attempting to use. The owner and operator shall be aware that use and repair of these products may require special skills and knowledge. Instructions and safety information shall be conveyed in the operator's native language before use of these jacks are authorized.
SAFETY INSTRUCTIONS BEFORE USE 1. Inspect the jack before each use. Do not use if there are bent, broken or cracked components. 2. Verify that the product and the application are compatible, if in doubt call Blackhawk Automotive Technical Service (816) 891-6390. 3. Read the operator's manual completely and familiarize yourself thoroughly with the product, its components and recognize the potential hazards associated with its use before using this product. 4.
ASSEMBLY Little, if any, assembly is required of this jack; refer to figure 1 and figure 2 for components location. Familiarize yourself with the illustrations in the operator's manual. Know your jack and how it operates before attempting to use. Assemble handle to the handle fork. Secure the handle with provided bolt to prevent inadverent removal. Connect to adequate air source and ensure air control valve is secured into the pipe nipple of the jack. OPERATION Lifting 1.
LUBRICATION 1. A periodic coating of light lubricating oil to pivot points, axles and hinges will help to prevent rust and assure that pump assemblies move freely. 2. When used on a daily basis, air pump should be internally lubricated before each use. Use only good quality air tool lubricant. If no inline oiler is used, pour a teaspoon of air tool oil into the inlet of the air control valve. Simply operate the jack using the air feature in order to fully distribute the oil.
Replacement Parts for Model BH6221 Item no. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 - Part no.
Replacement Parts for Model BH6301 Item no. 1 2 3 4 5 6 7 8 9 10 11 - Part no. A09-4-2200-106 A27-3-9904-103 A07-6-1301-105 A07-4-3400-509 A30-6-3220-100 A30-1-1001-108 522-2-0260-003 A30-6-1802-102 A07-3-3300-307 324-4-1900-208 236-6-1103-207 BH6301-L0 BH6221-M0 Description Handle Assembly Air motor Assembly Handle Fork Wheel Cover Plate, Upper Hydraulic Unit Return Spring Spring Plate Release Valve Cable Oil Filler Screw Saddle Adapter Label (not shown) Manual Qty.