User Guide

SAVE THESE INSTRUCTIONS

For your safety, read and understand the information contained within. The owner and operator shall have an under-

standing of this product and safe operating procedures before attempting to use this product. Instructions and Safety

information shall be conveyed in the operator's native language before use of this product is authorized. Make certain

that the operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If

any doubt exists as to the safe and proper use of this product as outlined in this factory authorized manual, remove from

service immediately.

Inspect before each use. Do not use if broken, bent, cracked or otherwise damaged parts are noted. If any component

of this product has been or suspected to have been subjected to a shock load (a load dropped suddenly, unexpectedly

upon it), discontinue use until checked out by a Porto-Power Blackhawk Automotive Authorized Service Center. Owners

and operators of this equipment shall be aware that the use and subsequent repair of this equipment may require

special training and knowledge. It is recommended that an annual inspection be done by qualified personnel and that

any missing or damaged parts, decals, warning / safety labels or signs be replaced with factory authorized replacement

parts only. Any component of this Porto-Power Kit that appears to be damaged in any way, is worn or operates

abnormally shall be removed from service immediately until such time as it can be repaired/replaced. Labels and

Operator's Manuals are available from manufacturer.

PRODUCT DESCRIPTION

Porto-Power Kits are designed to be used for pushing, spreading, and pressing of vehicle body panels as well as

various component parts and assemblies. A variety of attachments are included. B65114 is rated 8,000PSI and B65115

is rated 10,000PSI, where rams are rated from 4 to 10 tons.

WARNING: when extension tubes and/or offset attachments are used, the rated capacity is always reduced

by 50% for each tube or offset attachment connected. Refer to figure 3 on page 8 for more offset illustration.

SPECIFICATIONS

Figure 1 - B65114 and B65115 Components

Closed Height Extended Height

B65114 4 Ton 11" 15 3/4" 14 46 lbs

B65115 10 Ton 13 5/8" 19 3/4" 13 88 lbs

Model

Ram

Number of

Attachments

WeightCapacity

Dust Cover

Oil Filler Screw

Handle

Release Valve

Ram Plunger

Hose

Coupler

Ram Coupler

Ram