User's Manual
11
If Loner 900 fails to connect to Blacklines servers, the device will enter the no communi-
cation alarm pattern.
Turning Loner 900 O
Follow these steps for turning o the device:
1. Press and hold the Power Button for three seconds to power the device o.
The beeper will sound three long beeps while the power button is pressed. The
vibration motor vibrates for three long pulses. The beeper, vibration motor and
Power Button Indicator Light will turn o after three seconds.
The Loner 900 will ash the indicator light array during the shutdown sequence.
If Loner 900 is plugged in to charge, it will automatically turn o to avoid false alerts.
Loner 900 Power Button Light Behaviour
Loner 900 features a Power Button Indicator Light. Please see below for the light behaviour.
Light Behaviour Power Button
Indicator Light
Light ashing Indicates Loner 900 is powered and connecting to the
wireless network.
Light On Indicates that Loner 900 is powered and connected to
the wireless network.
Light O Indicates that Loner 900 is powered o or the battery
is depleted.
Loner 900 is referred to as being oine and is not connected to the Loner Network
when the Power Button Indicator Light is blinking or the device is powered o.
Loner 900 is referred to as being online and connected to the Loner Network when the
Power Button Indicator Light is on continuously.