User's Manual
14 // USER GUIDE
Initiating an Emergency Alert (Emergency Latch Use)
If you are in an emergency situation, perform the following:
1. Open the Emergency Latch.
Loner 900 will instantly send an Emergency Message to Loner Background Services.
Loner 900 will annunciate the high alarm pattern to notify others nearby of the event.
The alarm pattern on Loner 900 will continue until the Emergency Alert has been can-
celed or the battery is depleted.
Another Emergency Alert will not occur until the Emergency Alert has been canceled.
Silencing Emergency Alert (Emergency Latch Use)
1. Return the Emergency Latch to the closed position.
2. Press and hold the Acknowledge Button for 3 seconds.
After three seconds, the alarm pattern will be silenced and Loner 900 will return to
regular operation.
If the user silences an Emergency Alert, this does not cancel the alert within the Loner
Portal user account. Monitoring personnel are required to address the safety incident.
Initiating a Silent Emergency Alert
If you are in an emergency situation where you would prefer to not alert others in the area
(a silent emergency), perform the following:
1. Push and hold the acknowledge button for 5 seconds.
Loner 900 will vibrate for 3 seconds, pause and then vibrate for 2 more seconds. A
Silent Emergency Message will be sent to monitoring personnel.
Loner 900 will NOT locally annunciate the alarm pattern (it will remain silent).
Loner 900 will return to normal operation. You cannot cancel the Silent Emergency.
Monitoring personnel are required to address the safety incident.
Motion/Activity Monitoring
Loner 900 is constantly monitoring your motion. If Loner 900 has not detected motion for
ve minutes, it will enter the alarm mode and annunciate the low alarm pattern to indi-
cate a pending No-motion alert. If you do not require assistance, you have 30 seconds to
cancel the alert.
The time window and sensitivity of the No-motion Alarm are custom congurable in
the Loner Portal.