User's Manual

15
Muster Alarm Light
A blue LED on either side of the Loner 900 will light up if the unit is in a state of return-to-
muster or if there is an emergency text message at the BRidge that requires action.
Cancelling a Pending No-motion Alert
1. Press the acknowledge button for 1 second during the pending No-motion Alarm.
After one second, the alarm pattern will be silenced and Loner 900 will return to
regular operation.
If you have not cancelled the alert within 30 seconds, the No-motion Alert is sent, initiat-
ing the alert escalation process. Loner 900 will annunciate the high alarm pattern and will
continue until the alert is silenced or the battery is depleted.
Silencing a No-motion Alert
1. Press and hold the acknowledge button for 3 seconds.
After three seconds, the alarm pattern will be silenced and Loner 900 will return to
regular operation.
 If the user silences a No-motion Alert, this does not clear the alert within the Loner
Portal user account. Monitoring personnel are required to address the safety incident.
About True Fall Detection®
Loner 900 is constantly monitoring your motion for falls. If Loner 900 detects a fall, it will
enter the pending alarm mode and annunciate the low alarm pattern to indicate a pending
Fall Detected alert. If you do not require assistance, you have 30 seconds to cancel the alert.
Performance Expectations of the Fall Detection System
Loner 900 utilizes a gyroscope and accelerometer to determine the motion of nor-
mal human activity and thus determines when an extreme event occurs, such as a fall.
Accuracy of the system depends on you wearing Loner 900 on the belt at the hip. Wearing
the Loner 900 anywhere else may result in more false fall alarms.
Cancelling a Pending Fall Detected Alert
1. Press the acknowledge button for 1 second during the pending fall detect alarm.
After one second, the alarm pattern will be silenced and Loner 900 will return to
regular operation.