User's Manual

Quick Guide - 9 Quick Guide - 10 Quick Guide - 11 Quick Guide - 12 Quick Guide - 13 Quick Guide - 14 Quick Guide - 15 Quick Guide - 16
Additional information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or
transmitter.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Country Code selection feature to be disabled for products marketed to the US/CANADA
Trademarks and trade names are those of their respective owners. Android is a trademark of Google Inc. iOS is a
trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
BLACKLOUD®
42 Corporate Park #250 Irvine, CA 92606 USA
888-783-0378 [e-mail]
www.blackloud.com
Connecting via Other Device
1 Tap Copy Configuration from other device on the
Add BUZZI screen. Follow the onscreen instructions to
configure BUZZI Light via other device settings.
2 Select the BLACKLOUD device you want to copy the
connection settings from and tap Okay.
Connecting the BUZZI Light to the Internet
1 WiFi Connection
a. Have an internet-enabled WiFi AP within range. This access point will be the wireless
communication bridge between your mobile device and your BUZZI Light.
b. Follow the instructions on the BUZZI app to connect your BUZZI Light to the WiFi AP
mentioned above.
Testing Your BUZZI Light
Once the BUZZI Light is successfully connected to the BUZZI app, the BUZZI Light
will appear on the home screen.
1 Tap the power button to turn the light on. If the light turns on then you
have successfully connected the BUZZI Light.
1 Status button - Indicates whether the BUZZI
light is on or off
2 Power button - Turns the BUZZI light on
and off
1 Main menu Navigates to the Sign In menu
2 Device List Lists the BUZZI devices
connected
3 Group Menu Navigates to the Group menu
4 Add
Connection
Allows you to add more BUZZI
devices
5 BUZZI Device Tap to see/change details for
the BUZZI device
6 Power button Manually turns on/off the
BUZZI device
7 Home Screen Navigates to this home screen
8 Scene Menu Navigates to the Scene menu
1 Cancel Button Navigates to the Sign In menu
2 Scene Name Lists the BUZZI devices
connected
3 Activation Time Navigates to the Group menu
4 Remove Device
Button
Allows you to add more BUZZI
devices
5 Choose Device
Button
Tap to see/change details for
the BUZZI device
6 Save Button Manually turns on/off the
BUZZI device
7 Activation
Switch
Tap to enable/disable the
activation time
8 Device Switch Tap to include the device in
this scene
9 Delete Scene Tap to delete this Scene
1 Cancel Button Tap to cancel changes
2 Group Name
Button
Tap to edit the name of this group
3 Color Button Tap to change the color code of
the group
4 Auto Turn On
Button
Tap to set times for this group to
turn on
5 Auto Turn Off
Button
Tap to set times for this group to
turn off
6 Choose
Devices
Button
Tap to choose the BUZZI devices to
use for this group
7 Save Button Tap to accept settings
8 Activate Auto
On Switch
Tap to enable/disable the On time
for this group
9 Activate Auto
Off Switch
Tap to enable/disable the Off time
for this group
10 Delete Group Tap to delete this group
Remote Access
In order to control your BUZZI Light while away from home via your mobile device’s
internet connection you must first enable Remote Access.
To enable Remote Access:
1 Tap the BUZZI Light on the Home screen to
access its Features menu.
2 Tap the Remote Access Switch to enable it.
3 Tap to confirm the settings.
Customizing the BUZZI Light
The BUZZI App Home Screen
The Home screen appears each time the BUZZI app is opened. It features the
following menu options.
The Scene Menu
A Scene allows you to manage your device on a schedule. To
set up a Scene tap the Scene button on the Home screen to
enter the Scene menu, and then tap to create a new scene.
Setting Up a Scene
Use the Scene Setup screen to customize and create different Scenes for different
daily or weekly schedules.
The Group Menu
A Group allows you to manage multiple BUZZI devices
together. To set up a Group tap the Group button on the
Home screen, and then tap to create a new group.
Setting Up a Group
Use the Group Setup screen to group together different BUZZI devices for easier
management.
21
1 4
5
6
7
8
2
3
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
10