User Manual

DVE Key
DVEs, or digital video effects, are used to create picture-in-picture boxes with borders.
ATEM Mini has 1 channel of 2D DVE that allows scaling, rotation, borders and offers a
drop shadow.
Combining a background, DVE fill and DVE key/cut
Background
A full screen image.
Fill
Another full screen that has been scaled, rotated or has added borders and will be overlaid on
top of the background.
Key/Cut
In the case of a DVE key, the key/cut signal is generated by the switcher’s internal
DVEprocessor.
To set up a DVE key on the upstream keyer in ATEM Software Control:
1 Expand the upstream key palette and select the DVE tab.
2 Select the fill source.
3 Adjust the key parameters to refine the key. For a description of DVE key parameters,
refer to the information below.
Adjusting the x/y position of the DVE
You can independently adjust the x and y positions of the DVE using the position X and Y
settings, or you can tie X and Y parameters together so adjusting one will automatically adjust
the other. To achieve this, simply enable the ‘tie X and Y’ setting.
This also applies to the size parameters.
DVE parameters
Size X Adjusts the horizontal size of the DVE.
Size Y Adjusts the vertical size of the DVE.
Reset DVE Resets the DVE to screen. Useful if you lose track of the DVE
during adjustment.
108Keying using ATEM Mini