User's Manual

Regulatory Notices
Disposal of waste of electrical and electronic
equipmentwithintheEuropean union.
The symbol on the product indicates that this equipment must not be disposed
of with other waste materials. In order to dispose of your waste equipment, it
must be handed over to a designated collection point for recycling. The
separate collection and recycling of your waste equipment at the time of
disposal will help conserve natural resources and ensure that it is recycled in a
manner that protects human health and the environment. Formore information
about where you can drop off your waste equipment for recycling, please
contact your local city recycling office or the dealer from whom you purchased
the product.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and , if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
Operation of this product in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference
at personal expense.
Operation is subject to the following two conditions:
1 This device may not cause harmful interference.
2 This device must accept any interference received, including interference
that may cause undesired operation.
R- REM-BMD-201805001
ISED Canada Statement
This device complies with Canadian standards for Class A digital apparatus.
Any modifications or use of this product outside its intended use could void compliance
tothese standards.
Connection to HDMI interfaces must be made with high quality shielded HDMI cables.
This equipment has been tested for compliance with the intended use in a commercial
environment. If the equipment is used in a domestic environment, it may cause radio
interference.
Safety Information
For protection against electric shock, the equipment must be connected to a mains socket
outlet with a protective earth connection. In case of doubt contact a qualifiedelectrician.
To reduce the risk of electric shock, do not expose this equipment to dripping orsplashing.
Product is suitable for use in tropical locations with an ambient temperature of up to 40
o
C.
Note, however, that ideal film conditions are between 18 and 28 degrees Celsius.
Ensure that adequate ventilation is provided around the product and that it is not restricted.
93Regulatory Notices