User's Manual

8 L – Analog
Left channel analog audio output RCA connector.
9 R – Analog
Right channel analog audio output RCA connector.
Blackmagic Teranex Setup Settings
The Teranex setup utility can change all the same settings that are available using the front
panel, plus additional settings. You can access these settings by moving between the ‘video’,
‘scopes’, audio’, ‘configure’ and ‘about’ tabs.
The ‘about’ and ‘configure’ tabs are detailed in the ‘changing settings’ section in this manual.
Blackmagic Teranex Setup lets you adjust settings such as DisplayPort instant
lock to instantly resync the video signal when changing or routing sources, load
3D LUT files, changing the RCA analog audio output levels and more.
Video Tab
DisplayPort Instant Lock
Select this checkbox to enable DisplayPort instant lock so changing sources using the same
format is clean and glitch free. When DisplayPort instant lock is enabled, the DisplayPort output
signal is kept active even when changing sources. This means your converter does not have to
wait for the DisplayPort television or monitor tolock before displaying the video output as the
DisplayPort signal is already locked. It’simportant to note that this feature only works when
changing sources using the same video standard.
The DisplayPort instant lock feature can introduce a small delay in video and audio, so if you
need zero delay in your converted output you can bypass the DisplayPort instant lock feature
by deselecting the checkbox.
Clip to Legal Levels
‘Clip to legal levels’ describes the converter’s input range because DisplayPort monitors always
display full range video. When ‘normal’ is selected, Teranex Mini SDI to DisplayPort 8K expands
the input to match the monitor. If you select ‘show illegal’ the input range is sent to your monitor
unexpanded.
Dynamic Range Override
This setting lets you select a color profile for your monitor, such as Rec. 709, or choose ‘auto’ to
keep the original dynamic range of the source.
16Teranex Mini – SDI to DisplayPort 8K HDR