User's Manual

3.15 The calibration process takes 10-15 minutes. Teranex Mini SDI to DisplayPort 8K HDR
generates and measures a wide range of colors at varying luminance values, comparing
the measured results against the expected values. When the procedure concludes,
itgenerates a calibration 3D LUT and shows a confirmation message.
Press ‘set’ to return to the ‘calibration’ menu. Press ‘menu’ to return to the home screen.
The generated 3D LUT is assigned ‘3D LUT 1’ and enabled. By default, the 3D LUT is
named ‘calibration LUT’.
NOTE This 3D LUT is stored in your converter’s internal memory, and we
recommend you use Blackmagic Teranex Setup to save it to your computer.
For more information on how to manage 3D LUTS, see the ‘Blackmagic
Teranex Setup Settings’ section.
The monitor calibration 3D LUT is always assigned to ‘3D LUT 1’ by default.
LCD calibration probe ready_UI
23Teranex Mini – SDI to DisplayPort 8K HDR