User's Manual

8 L – Analog
Left channel analog audio output RCA connector.
9 R – Analog
Right channel analog audio output RCA connector.
Blackmagic Teranex Setup Settings
The Teranex setup utility can change all the same settings that are available using the front
panel, plus additional settings. You can access these settings by moving between the ‘video’,
‘scopes’, audio’, ‘configure’ and ‘about’ tabs.
The ‘about’ and ‘configure’ tabs are detailed in the ‘changing settings’ section in this manual.
Blackmagic Teranex Setup lets you adjust settings such
as HDMI instant lock to instantly resync the video signal
when changing or routing sources, load 3D LUT files,
change the RCA analog audio output levels and more.
Video Output Tab
HDMI Instant Lock
Select this checkbox to enable HDMI instant lock so changing sources using the same format is
clean and glitch free. When HDMI instant lock is enabled, the HDMI output signal is kept active
even when changing sources. This means your converter does not have to wait for the HDMI
television or monitor tolock before displaying the video output as the HDMI signal is already
locked. It’simportant to note that this feature only works when changing sources using the
same video standard.
The HDMI instant lock feature can introduce a small delay in video and audio, so if you need
zero delay in your converted output you can bypass the HDMI instant lock feature by
deselecting the checkbox.
28Teranex Mini – SDI to HDMI 8K HDR