User's Manual

The monitor calibration 3D LUT is always
assigned to ‘3D LUT 1’ by default.
Control Panel Settings
The ‘home’ screen shows a video preview of the SDI input with format and frame rate
information.
The LCD menu lets you change settings for ‘video’, ‘audio output’, ‘scopes’, ‘network’,
‘color calibration’ and ‘setup’. Keep reading for information about each setting.
Video Menu
The ‘video’ menu has options for ‘HDMI instant lock’ and ‘HDMI output range’. HDMI instant
lock keeps the HDMI signal active when changing sources so the converter does not have to
wait for the HDMI television or monitor to lock before displaying the video output. HDMI output
range keeps the output within HDMI legal levels.
Audio Output Menu
The ‘audio output’ menu lets you select a stereo pair of channels to de-embed and
adjust the gain.
Scopes Menu
The ‘scopes’ menu lets you enable one or two scope overlays. You can set the type of scopes,
as well as their size, position, brightness and the opacity of the scope background and
graticule. When you select the types of scopes, you can choose waveform, vectorscope 100%,
vectorscope 75%, histogram, RGB parade or YUV parade.
35Teranex Mini – SDI to HDMI 8K HDR