User's Manual

Teranex Mini – IP Video 12G
If you are looking for information on the installation and operation of Blackmagic
Teranex Mini IP Video 12G, refer to the Blackmagic Teranex Mini IP Video 12G manual
which can be downloaded from www.blackmagicdesign.com/support.
Teranex Mini – SDI to HDMI 12G
Your Teranex Mini – SDI to HDMI 12G model can be used to connect a huge range of HDMI
displays and video projectors to SDI video equipment. Your converter automatically switches
between SD SDI, HD-SDI, 3G-SDI, 6G-SDI and 12G-SDI input sources and converts to
HDMIwith embedded audio, plus balanced AES/EBU or analog audio out. The ‘R analog’
XLRconnector can also be set to output timecode.
The HDMI instant lock feature lets you lock the HDMI output so that changing sources using the
same format is clean and glitch free. If your converter detects a HD monitor or TV connected to
the HDMI output and has Ultra HD connected to the SDI input, the Ultra HD source will be
automatically down converted so you can view the Ultra HD source on an HD monitor.
You can also load 3D LUTs for adding looks, grades, and color profiles to your converted
output. The 3D LUT is a full 33 point hardware lookup table for greater accuracy with color
manipulation and can even be used to accurately color calibrate consumer televisions so they
can be used for critical color correction work.
The 3D LUT also allows color space conversions so different color spaces can be used with
various displays.
Your Teranex Mini – SDI to HDMI 12G comes with two default LUTs, including color to
monochrome and Blackmagic camera default color space to Rec. 709.
ETHERNET PoE+ SDI IN
L - ANALOG
AES/EBU
R - ANALOG
AES/EBU - T/C
HDMI OUT
SDI LOOP OUT
1 2 3
ETHERNET PoE+ SDI IN
L - ANALOG
AES/EBU
R - ANALOG
AES/EBU - T/C
HDMI OUT
SDI LOOP OUT
4 5
6 7 8 9 10
37Teranex Mini – SDI to HDMI 12G