User's Manual

Audio Input Menu
Set XLR Input / Set Audio input
This menu allows you to select between XLR and HDMI audio input. Selecting HDMI will embed
the HDMI audio into the SDI video output. Selecting ‘XLR’ lets you choose between analog,
AES/EBU, and timecode inputs, as well as which channels of your SDI audio output you wish to
embed these into. You can also adjust the gain on the audio signal.
Selecting AES/EBU allows the additional option of checking ‘sample rate converter.’ When this
is selected, the sample rate of your SDI audio output will be forced to 48kHz, the correct
sample rate for television.
If you need to convert Dolby audio via an AES/EBU source that is sample locked to a reference,
make sure you disable the sample rate converter by deselecting the checkbox, otherwise it
may interfere with your Dolby audio conversion.
Select between ‘auto’, ‘force to HD’, or ‘force to Ultra HD’ conversion
settings using the ‘video’ settings page in Blackmagic Teranex Setup.
You can also set your converter to detect 60 frames per second video
and automatically convert it to 59.94 frames per second for when
connecting to video equipment using the standard 59.94 frame rate.
Adjust your analog audio levels and AES/EBU
levels using the ‘audio’ settings.
46Teranex Mini – HDMI to SDI 12G