User's Manual

Video Processing Menu
SDI Output
Use this menu to select between SDI output options. The available options are single link, dual
link, quad HD split and quad link. These dictate how an 12G-SDI Ultra HD signal is split between
your converter’s four SDI outputs.
While a 12G-SDI input signal can be output as quad link or quad HD split, 6G inputs can be split
into four 1.5G outputs, or two pairs 3G outputs. Lower bitrate inputs, such as 3G-SDI or 1.5G-SDI,
can be duplicated across all four outputs by choosing ‘single link.’
3G Output
This lets you change the 3G-SDI output standard to maintain compatibility with equipment that
can only receive level A or level B 3G-SDI video. Level B is the default setting. These settings
only apply when outputting 3G-SDI video.
Adjust your SDI output settings using the ‘video’
settings page in Blackmagic Teranex Setup.
Teranex Mini Smart Panel Settings
The ‘video’ and ‘network’ settings can be changed from the front panel if you have the optional
Teranex Mini Smart Panel installed. The settings available in these menus are identical to those
detailed in the ‘Blackmagic Teranex Setup settings’ section. For more information on changing
settings using the Teranex Mini Smart Panel, refer to the ‘changing settings’ section in
this manual.
Using Teranex Mini Smart Panel gives you access to
the same settings as Blackmagic Teranex Setup.
71Teranex Mini – 12G–SDI to Quad SDI