User's Manual

Switches
The switch 6 ‘on/off’ setting lets you change the 3G-SDI output standard to maintain
compatibility with equipment that can only receive level A or level B 3G-SDI video. Level B is
the default setting, and is accessed by setting switch 6 to ‘off’. To output Level A video, set
switch 6 to ‘on.’ These settings only apply when outputting 3G-SDI video.
The switch legend on the base of your converter gives you
all the information you need to change conversion settings.
Blackmagic Teranex Setup Settings
The Teranex setup utility can change all the same settings that are available using the switches,
plus additional settings. You can access these settings by moving between the ‘video,’
‘configure,’ and ‘about’ tabs.
The ‘about’ and ‘configure’ tabs are detailed in the ‘changing settings’ section in this manual.
The ‘video’ tab for Teranex Mini – SDI to Analog 12G contains the following settings.
Video Processing Menu
3G Output
This lets you change the 3G-SDI output standard to maintain compatibility with equipment that
can only receive level A or level B 3G-SDI video. Level B is the default setting. These settings
only apply when outputting 3G-SDI video.
74Teranex Mini – Quad SDI to 12G-SDI