User's Manual

Teranex Mini – SDI Distribution 12G
With Teranex Mini – SDI Distribution 12G you can distribute a single SDI video input to up to
eight SDI outputs. Your Teranex Mini features the latest multi rate 12G-SDI connections with full
SDI re-clocking allowing the converter to automatically switch between all SD, HD and Ultra HD
formats up to 2160p60. Your Teranex Mini – SDI Distribution 12G is perfect for distributing a
single SDI signal to multiple devices such as monitors, switchers and encoders.
ETHERNET PoE+ SDI IN
SDI OUT
SDI OUT
SDI OUT
SDI OUT
SDI OUT
SDI OUT
SDI OUT
SDI OUT
SDI Distribution 12G
1 2 3
ETHERNET PoE+ SDI IN
SDI OUT
SDI OUT
SDI OUT
SDI OUT
SDI OUT
SDI OUT
SDI OUT
SDI OUT
SDI Distribution 12G
4 5
6 7
Connectors
1 Mini-B USB Port
The USB port lets you connect your converter to a Mac or Windows computer so you
can adjust settings and update your converter’s internal software.
2 Switches
Switches on the front of your Teranex Mini let you change settings using the
tip of a pen.
3 LED Status Indicator
The LED glows white when the converter is receiving power and green when a valid
video input signal is detected. When more than one Teranex Mini is connected to your
computer, you can identify your converter using the ‘identify’ checkbox in Blackmagic
Teranex Setup. When the checkbox is enabled, your converter’s LED will flash
on and off.
4 Power
Standard built in IEC C14 connector for 90 – 240 volt AC power supply.
5 SDI Out
The 8 BNC connectors labeled ‘SDI Out’ let you connect 8 independent outputs to SDI
video equipment.
76Teranex Mini – SDI Distribution 12G