User's Manual

6 Ethernet PoE+
The Ethernet connector lets you plug your Teranex Mini into a network switch or
computer so you can change settings using Blackmagic Teranex Setup. The Ethernet
port also supports power over Ethernet plus.
7 SDI In
Use this BNC connector to plug in your SDI source video.
Switches
There are no user settings required for Teranex Mini – SDI Distribution 12G.
Teranex Mini – SDI Distribution 12G Block Diagram
SDI IN
Ethernet
with Power
8 Outputs
Re-Clocking
Distribution
Amplifier
Central Processor
and Firmware
Mini Switches
USB
Input automatically
detects between
SD/HD/6G/12G-SDI
SDI Out
SDI Out
SDI Out
SDI Out
SDI Out
SDI Out
SDI Out
SDI Out
Teranex Mini – Optical to HDMI 12G
Your Teranex Mini – Optical to HDMI 12G model can be used to connect a huge range of HDMI
displays and video projectors to equipment that supports SDI video via optical fiber. Your
converter automatically switches between SD SDI, HD-SDI, 3G-SDI, 6G-SDI and 12G-SDI input
sources and converts to HDMI with embedded audio, plus balanced AES/EBU or analog audio
out. The ‘R analog’ XLR connector can also be set to output timecode.
The HDMI instant lock feature lets you lock the HDMI output so that changing sources using the
same format is clean and glitch free. If your converter detects a HD monitor or TV connected to
the HDMI output and has Ultra HD connected to the SDI or Optical input, the Ultra HD source
will be automatically down converted so you can view the Ultra HD source on an HD monitor.
You can also load 3D LUTs for adding looks, grades, and color profiles to your converted
output. The 3D LUT is a full 33 point hardware lookup table for greater accuracy with color
manipulation and can even be used to accurately color calibrate consumer televisions so they
can be used for critical color correction work.
77Teranex Mini – Optical to HDMI 12G