User's Manual

The 3D LUT also allows color space conversions so different color spaces can be used with
various displays.
Your Teranex Mini – Optical to HDMI 12G comes with two default LUTs, including color to
monochrome and Blackmagic camera default color space to Rec. 709.
SDI IN
L - ANALOG
AES/EBU
R - ANALOG
AES/EBU - T/C
HDMI OUT
ETHERNET PoE+
OPTICAL
OUT / IN
1 2 3
SDI IN
L - ANALOG
AES/EBU
R - ANALOG
AES/EBU - T/C
HDMI OUT
ETHERNET PoE+
OPTICAL
OUT / IN
4 5
6 7 8 9 10
Connectors
1 Mini-B USB Port
Connects to the Blackmagic Teranex Setup software via a Mac or Windows computer
for adjusting settings and updating your Teranex Mini’s internal software.
2 Switches
Adjustable switches for changing settings.
3 LED Status Indicator
Glows white when the converter is receiving power and green when a valid video input
signal is detected. Will flash on/off to identify individual converters via Blackmagic
Teranex Setup.
4 Power
Standard built in IEC C14 connector for 90 – 240 volt AC power supply.
5 HDMI Out
HDMI video output.
6 Ethernet PoE+
Connects to a network switch or computer so you can change settings using the
Teranex setup utility. The Ethernet port also supports power over Ethernet plus.
7 SDI In
SDI video input BNC connector.
8 Optical Input and Output
Optical video input and output LC connectors via optional SMPTE compatible SDI
optical fiber module. The optical input automatically detects between SD/HD/6G/12G-
SDI. The optical output can be used as a loop through output.
78Teranex Mini – Optical to HDMI 12G