User's Manual

9 L – Analog or AES/EBU
Balanced left channel analog audio, or digital AES/EBU audio output XLR connector.
10 R- Analog, AES/EBU or Timecode
Balanced right channel analog audio, or digital AES/EBU audio output XLR connector.
Can also be configured for timecode output.
Switches
Teranex Mini – Optical to HDMI 12G’s switches provide the following settings:
Switches 8 – Analog Audio, AES/EBU Audio
Set switch 8 to ‘off’ to output balanced analog audio. Set to ‘on’ for digital AES/EBU audio.
Switches 7 – Output Audio/Timecode
Set switch 7 to ‘on’ to output timecode via the R channel audio XLR connector. Set to ‘off to’
output audio.
Switches 4, 3, 2 – SDI Audio De-Embed Bit 2, 1, 0
Switches 4, 3 and 2 are represented as bits 2, 1, and 0 respectively. This simply means that by
setting various on/off combinations for switches 4, 3, and 2, you can choose which pair of audio
channels from your SDI or Optical input you would like to output to HDMI, analog or
AES/EBU audio.
OUTPUT AUDIO TIMECODE
1-2
3-4
1-4
5-8
9-12
13-16
5-6
7-8
SWITCHES
9-10
11-12
13-14
15-16
ANALOGAES/EBU
SDI AUDIO DE-EMBED BIT 0
SDI AUDIO DE-EMBED BIT 1
SDI AUDIO DE-EMBED BIT 2
The switch legend on the base of your converter gives you all the
information you need to change conversion settings.
SDI Audio Selection Table
By using the following combinations of switch settings, you can select which SDI or Optical
audio channels to embed into your Teranex Mini – Optical to HDMI 12G’s output signal.
Analog Audio Channels Switch 4 Switch 3 Switch 2 Switch Diagram
1 and 2 OFF OFF OFF
3 and 4 OFF OFF ON
79Teranex Mini – Optical to HDMI 12G