User's Manual

Connectors
1 Mini-B USB Port
Connects to the Blackmagic Teranex Setup software via a Mac or Windows computer
for adjusting settings and updating your Teranex Mini’s internal software.
2 Switches
Adjustable switches for changing settings.
3 LED Status Indicator
Glows white when the converter is receiving power and green when a valid video input
signal is detected. Will flash on/off to identify individual converters via Blackmagic
Teranex Setup.
4 Power
Standard built in IEC C14 connector for 90 – 240 volt AC power supply.
5 Y or NTSC/PAL
Analog component Y, NTSC or PAL composite output BNC connector.
6 B-Y or S-VIDEO Y
Analog component B-Y, or S-Video Y output BNC connector.
7 R-Y or S-VIDEO C
Analog component R-Y, or S-Video C output BNC connector.
8 Ethernet PoE+
Connects to a network switch or computer so you can change settings using
Blackmagic Teranex Setup. The Ethernet port also supports power over Ethernet plus.
9 SDI In
SDI video input BNC connector.
10 Optical Input and Output
Optical video input and output LC connectors via optional SMPTE compatible
SDIoptical fiber module. The optical input automatically detects between
SD/HD/6G/12G-SDI. The optical output can be used as a loop through output.
11 L – Analog or AES/EBU
Balanced left channel analog audio, or digital AES/EBU audio output XLR connector.
12 R – Analog, AES/EBU or Timecode
Balanced right channel analog audio, or digital AES/EBU audio output XLR connector.
Can also be configured for timecode output.
Switches
Teranex Mini – Optical to Analog 12G’s switches provide the following settings:
Switch 8 – Analog Audio, AES/EBU Audio
Set switch 8 to ‘off’ to select balanced analog audio, or to ‘on’ for digital AES/EBU audio output.
Switch 7 – 7.5 IRE, 0.0 IRE
The USA and countries using NTSC with 7.5 setup should set switch 7 to ‘off’. If you’re working
in countries not using 7.5 setup, for example Japan, set switch 7 to ‘on’. This setting only affects
composite or S-Video outputs.
89Teranex Mini – Optical to Analog 12G