User's Manual

Adjust your video luminance and chroma levels
and component chroma levels using the ‘video’
settings page in Blackmagic Teranex Setup.
Adjust your analog audio levels and AES/EBU
levels using the ‘audio’ settings page.
Audio Input Menu
This menu allows you to select between analog, AES/EBU, and timecode audio inputs, as well
as which channels of your SDI or optical audio output you wish to embed these into. You can
also adjust the gain on the audio signal.
Selecting AES/EBU allows the additional option of checking ‘sample rate conversion.’ When this
is selected, the sample rate of your SDI or optical audio output will be up or down converted to
24-bit, 48kHz.
Your Teranex Mini will retain its last settings whether applied via switch, Smart Panel or Teranex
setup utility. If reverting to switch control after removing the Smart Panel or updating your
converter’s settings via software, you may need to toggle individual switches for new settings to
take effect.
97Teranex Mini – Analog to Optical 12G