User Manual

CHAPTER
COLOR
COLOR231
9
The second setting in this area is to select to source of the RED metadata for all the other decoder
settings.If youleavethissettingon‘REDDefault’thenDaVinciResolvewillusethedecodesettings
supplied from RED. If you select ‘Camera Metadata,’ DaVinci Resolve will extract the controlling
metadatafromther3dleasitwassetbythecamera.The‘Project’settingwillusetheDaVinciResolve
configuration you set on the Source tab.
On the right of the window the Red Default, Camera Metadata, and Project settings for this clip are
displayed adjacent to the slider controls for the Clip settings. The ‘Clip’ option provides you with
signicantlygreatercontrolforeachclip.Selecting‘Clip’willmakealltheothercontrolsonthiswindow
active and you can set them as you prefer for this particular r3d clip.
Onceyouhaveselectedthe‘Clip’optionthereisalsoa‘Reset’buttonthatishighlightedatthebottomof
the window. If you make any changes to the clip decoder settings and you wish to revert to the settings
thatexistedwhenyourstopenedthewindow,usethe‘Reset’button.The‘Cancel’buttonwillclose
thewindowwithnochangesandthe‘Apply’buttonwillsavethechangesmadeandclosethewindow.
Master Red Decoder Settings - Clip Selection