User Manual

CHAPTER
COLOR
COLOR251
9
Using the RGB Mixer with “To monochrome” turned on gives you the ability to mix your own
custom blends of all three color channels to emphasize the creative characteristics you require.
For instance, increasing the mix of blue and decreasing red and green can give skin tones a darker,
metallic sheen. The following screenshots show multiple versions of the same image with different
monochrome mixes.
Like the parameters in Color mode, you can use the RGB Mixer’s “To monochrome” mode to subtract
one color channel from the others, for even more creative effects.
Two methods of resetting slider values in monochrome mode:
 • Double-clickanyslider’snumericvaluetoresetthatsliderto0.
 • Right-clickanywherewithintheRGBMixertabandchooseResetfromthemenuto
set the sliders to their default 21, 71, 7 values.
Using the RGB Mixer Controls with the DaVinci Resolve
Control Surface
All of the RGB Mixer controls are available from the DaVinci Resolve Control Surface.
To open the RGB Mixer controls on the DaVinci Resolve control surface:
 • PresstheCURVESdisplaybuttononthecenterpanel.
Three monochrome mixes of the same image